Building Block 150 4:1 add on stage

Price: $27.50
Code: BB150B-1
Quantity | Price |
---|---|
1-4 | $27.50 |
5-9 | $24.75 |
10-49 | $23.92 |
50+ | $22.55 |
This is a complete kit to increase the reduction of a BB150 gearbox by an additional 4:1
Important Notes:
The ringgears are marked with a dimple pattern that represents the stage. 1 dimples is a single stage and 3 dimples is an output stage. This 4:1 Add on Stage ringgear is marked with one dimple. In order to add a stage, you must use a ringgear that is marked with one dimple, and it must be added to the motor side.
Every gearbox must have one and only one ringgear marked with a set of three dimples and it must be the ringgear next to the output shaft.
You CAN NOT use this kit as a replacement for the output stage of a stock gearbox - the carrier plate and ringgear are different.
Important Notes:
The ringgears are marked with a dimple pattern that represents the stage. 1 dimples is a single stage and 3 dimples is an output stage. This 4:1 Add on Stage ringgear is marked with one dimple. In order to add a stage, you must use a ringgear that is marked with one dimple, and it must be added to the motor side.
Every gearbox must have one and only one ringgear marked with a set of three dimples and it must be the ringgear next to the output shaft.
You CAN NOT use this kit as a replacement for the output stage of a stock gearbox - the carrier plate and ringgear are different.
Specifications | ||||
Reduction | : 4:1 | |||
Stages | : 1 - 4:1 | |||
Planet/Sun Gear Material | : Cold Rolled Steel | |||
Ringgear Material | : Hard Anodized Aluminum w/Teflon | |||
Gear Specs | : 0.7mod, 20deg PA | |||
Weight | : 3oz | |||
Width | : 0.5 in | |||
Height/Width (Square) | : 1-7/8 in | |||