Building Block 220 4:1 add on stage
Price: $40.00
Code: BB220B-1
| Quantity | Price |
|---|---|
| 1-4 | $40.00 |
| 5-9 | $36.00 |
| 10-49 | $34.80 |
| 50+ | $32.80 |
This is a complete kit to increase the reduction of a BB220 gearbox by an additional 4:1
Important Notes:
The ringgears are marked with a dimple pattern that represents the stage. 2 dimples is a single stage and 4 dimples is an output stage. This 4:1 Add on Stage ringgear is marked with one set of 2 dimples. In order to add a stage, you must use a ringgear that is marked with one set of 2 dimples, and it must be added to the motor side.
Every gearbox must have one and only one ringgear marked with a set of four dimples and it must be the ringgear next to the output shaft.
You CAN NOT use this kit as a replacement for the output stage of a stock gearbox - the carrier plate and ringgear are different.
Important Notes:
The ringgears are marked with a dimple pattern that represents the stage. 2 dimples is a single stage and 4 dimples is an output stage. This 4:1 Add on Stage ringgear is marked with one set of 2 dimples. In order to add a stage, you must use a ringgear that is marked with one set of 2 dimples, and it must be added to the motor side.
Every gearbox must have one and only one ringgear marked with a set of four dimples and it must be the ringgear next to the output shaft.
You CAN NOT use this kit as a replacement for the output stage of a stock gearbox - the carrier plate and ringgear are different.
| Specifications | ||||
| Reduction | : 4:1 | |||
| Stages | : 1 - 4:1 | |||
| Planet/Sun Gear Material | : Cold Rolled Steel | |||
| Ringgear Material | : Hard Anodized Aluminum w/Teflon | |||
| Gear Specs | : 0.8mod, 20deg PA | |||
| Weight | : 9oz | |||
| Width | : 0.675 in | |||
| Height/Width (Square) | : 2.5 in | |||