Colson Series 1 Hub, Press Fit, 1/2 Keyed Bore

Colson Series 1 Hub, Press Fit, 1/2 Keyed Bore

    Price:     $6.50

    Code: HC1-P3-KS4

    Quantity Price
    1-4 $6.50
    5-9 $5.85
    10-49 $5.66
    50+ $5.33

    These hubs were specially designed to mount the 7/8 wide Series 1 Colson Wheels and provide one of the most durable methods of mounting them.

    The hubs are designed for an interference fit into the wheel and feature integrated cleats that cut into the wheel bore. The interference fit combined with the cleats provide excellent pull-out resistance and torque transfer.

    The hubs are installed by pressing them into a modified bore of the wheel (drilled to 3/4in.) We recommend using a 3-5 ton arbor press or a large bench vise to install the hubs. We DO NOT recommend hammering the hubs in. You can select to have hubs installed in the the wheels when ordered together. This is available as an option on the appropriate wheel products.

    With a suitably large press, the hubs can be pressed out and reused in other wheels. Please note the process of removing the hub will usually destroy the wheel bore making the wheel unusable.

    IMPORTANT NOTE The standard bore on a Series 1 wheel is too small for a 1/2in bore with an 1/8in keyway so this hub is slightly larger than standard. The hub is designed to be inserted into a drilled 3/4in hole. The wheel bore can be enlarged by simply drilling it out with a standard 3/4in drill.

    Specifications      
    For Wheel : Colson Series 1, 7/8 Width
    For Shaft : 1/2 in with 1/8in keyway
    Wheel Bore : 3/4 in
    Total Length : 1.03 in
    Weight : 0.44oz
    Finish : Tumbled
    Keyway : 1/8 in

    close